Dispensor Sensors | Dover Fueling Solutions
top of page
Social Share Images for DFS Website (63).png

与我们联系

ProGauge MagLink LX Plus 控制台

PLLD.png
Top of sensors page

我们相信选择

在DFS,我们相信您应该得到最好的。我们提供种类繁多的油量表控制台,旨在为您的燃料业务提供完美水平的功能,无论其大小或用途如何。我们的产品使您能够创建一个全面的燃料信息管理系统,可以有效地处理一系列的油箱和前台问题。先进的功能提供了更高级别的燃料管理功能,例如集中的站点管理,精确的库存对账和损失预防分析。

Social Share Images for DFS Website (63).png

Alieviate Worry

You don't want your business to be crippled by the presence of unwanted substances or liquids on site or within equipment. Our sensors facilitate the quick alert to any issues that may cause problems for both you and your customers, such as water ingress within the fuel tank.

Automatic Deactivation

If unwanted substances or liquids are detected, certain sensors are able to quickly disconnect or deactivate the equipment affected instantly, such as disable a fuel dispenser from being used. Audible alarms are also an integral part of a selection of the majority of our sensors, so that notifications are not missed.

IntelliSense Technology

IntelliSense technology delivers the ability to monitor all areas of the fuel site, such as tank interstice, piping sumps, STP containment sumps, dispenser sumps/pans and monitoring wells. This proprietary technology is designed so that SiteSentinel Integra 100 and Integra 500 tank gauges, regardless of the type or place of installation, will know immediately what type of sensor is connected and the model number and name.

我们的传感器

  • 体积线泄漏检测器(VLLD) -  利用高精度流量传感器,VLLD提供了一种行业领先的方法来检测和测量燃料管道中的泄漏。VLLD可以测试直径为1.5英寸至4英寸的管道的体积,并可以监控刚性管道,柔性管道或两者的组合,使其成为任何现场配置的理想泄漏检测解决方案。 

 

  • 压力线泄漏检测器(PLLD)- 我们的压力线泄漏检测器(PLLD)传感器可监控站点操作过程中的压力衰减或下降。安装在制造商的潜水涡轮泵中,如果压力读数与标准值不同并且可能表明存在泄漏,则PLLD传感器将发出警报。 
    我们的PLLD传感器在全泵压力下以每小时0.1加仑和0.2加仑(gph)的压力执行精密管路泄漏测试,并进行压力衰减测试以满足美国的要求。 EPA 3.0 gph测试要求。 

  • 带水指示剂的间质碳氢液体传感器(区分) - 用于双壁罐的间质(环形)空间。

  • 碳氢化合物液体传感器(无差别)或带水指示剂的碳氢化合物液体传感器(有差别) 

  • 碳氢化合物液体污水传感器 - 检测碳氢化合物液体或蒸气的存在。用于油槽和分配器盘。 

  • 双液位储层传感器 – 监控储罐中充满液体的间隙空间中盐溶液的液位。 

  • 单浮子传感器 - 可以在任何油槽中使用,并检测是否存在液体。

  • 间隙光学液体传感器 - 主要用于监视双壁罐的间隙区域,也可以用于油槽和分配器盘中,但必须在没有光线的区域中使用。

  • 蒸汽传感器 – 检测干燥罐间隙或干燥监测井中的碳氢化合物蒸汽。

2205_Dover_Fueling_Solutions_UnitiExpo_5 (1).jpg
bottom of page